Tronic TLG 500 B1 Bedienungsanleitung PDF herunterladen (Seite 30)

- 28 -

Commissioning

• Before taking the Battery Charger into use, check

that all items are complete/available and free of

visible damage.

• Place the Battery Charger on a straight, level,

scratch and slip resistant surface.

Notice:

This appliance is equipped with non-slip rubber feet.

As furniture surfaces may be made of a variety of

materials and are treated with many different types

of cleaning agents, it cannot be completely ruled

out that some substances contain ingredients which

may corrode the rubber feet and soften them.

If possible, place an anti-slip material under the device.

• Compare the technical data with that of your

current mains power supplier. If they are the

same, connect the power cable to a mains

power socket. The LEDs now light up red and

green. The Battery Charger is now ready for use.

Charging batteries

Danger!

Charge exclusively rechargable batteries of the

types „Ni-Cd“ and „Ni-MH“.

NEVER recharge batteries of other types or non-

rechargable batteries. These are not suitable for

recharging. They could irreparably damage the

Battery Charger and the inserted batteries. There is

also the danger of a fire as well as an explosion!

Notice:

Ensure that the batteries are inserted into the

charging slots in accordance with their polarities.

Otherwise, the batteries will not be charged.

• Insert the batteries into the charging slots.

• Press the 9 V Block batteries into the charging

slot until they audibly engage.

Between 1-6 batteries can be loaded individually:

• 4 x Type C or Type D in the charging slots 1 to 4,

• 4 x Type AA or AAA in the charging slots 1 to 4,

with additionally 2 x Type 9 Volt Block batteries

in the charging slots 5 and 6.

• The charging process now begins. The Battery

Charger has an LED for each charging slot. The

LEDs of the charging slots indicate the charge

state of the battery they contain.

• In the first 5 seconds, the Battery Charger

performs a quick capacity test:

- The LED of the charging slot glows green:

Capacity over 90 %.

- The LED of the charging slot blinks green:

Capacity between 80 % - 90 %.

- The charging bay LED lights up red:

The capacity is between 70 % - 80 %

- The charging bay LED blinks red:

The capacity is under 70 %.

Notice:

If the charging bay LED blinks red for longer than

5 seconds the rechargeable battery is not correctly

inserted into the charging bay or the battery is de-

fective.

When the capacity of the battery is determined,

charging process starts.

IB_68599_TLG500B1_LB5.qxd 18.10.2011 14:30 Uhr Seite 28

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare

Tronic TLG 500 B1 Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Stromversorger Tronic TLG 500 B1